Видео

I cant find pc case for top mount .. need help ..

Rule #1, NEVER buy parts months in advance. If they have problems you won't be able to return them..

Please re-test the P14 ARGB. Having it missing from the 140mm noise-to-performance chart gives a really misleading ranking to the others.

I think they might have update the microcode to a 85°C Tmax ? .. I have a 7600X with the Xilence cooler.. it never exceeds 85° but hits that point after a couple seconds when I give it full throttle.

Just installed mine with the AL120 V2 fans 😍😍 Just need to upgrade my psu from 850watt bronze to a 1000watt gold with pcie 5.0. My Ryzen 9 7900X eats a lot of power lucky the RTX 4070 Super don't need as much as the others in the same category. But it keeps my cpu "cold" 39°C when it's idle and up to 78°C when gaming in 4k. Also love the pump and the different heads you can change.

Why didn't you test the Peerless assassin

i am conflicted to trust thermaltake, products i had in the past were pretty meh, not bad not great, and also theres the issue when they stole Caselabs idea... TWICE and even went as far as being douchebags to sue Caselabs, hard pass, mostly for customer trust. I think id go with Arctic as always, pretty happy with my extremely long named arctic case fans, 3 years and still strong!

Where did u plug the case fans because I can’t figure out where to plug them in

there’ll be a review on the corsair lx120 fans?

So this will not fit an LGA 1200 right?

mantap 👍👍

In Asia this is the Tecware Fusion 2

The problem with Thermalfake is their quality control, their fans dying a couple of months after purchase, and them not honouring warranty claims. They can be the best fans in the world, but I would not trust them.

Edit: Xilence reacted to the non-reactive ARGB/Fan Controller. Moving forward, all Gleam cases have a new controller installed. This time functioning as expected. The existing stock has been updated by manually opening every box and replacing the controller. To whoever was in charge of replacing hundreds if not thousands of controllers, I'm sorry.

आपकी समीक्षा देखने के बाद (आपकी समीक्षा में कुछ भी गलत नहीं है, बहुत अच्छी समीक्षा है , सुन्दर छायांकन और प्रज्ञावान विश्लेषण 👌👌👏👏), मैंने "be quiet! Dark Rock Elite" संगणक शीतक क्रय करने का निर्णय लिया है ; Nactua मेरे उपयोग के लिए बहुत अधिक बड़ा है , महंगा है , दिखने मैं भी कुछ खास नहीं है और कार्यकुशलता में "be quiet! Dark Rock Elite" से केवल १%-२% ही आगे है ।

I’m all into the 12 pro myself. First fan to make me look away from Noctua in a while.

my Arctic Liquid Freezer III 420mm AIO struggles to handle 253W and 370A current on my i9 14900ks. with 253Watts and 307 current power limit enforced, it sits at 89C. I feel as if this is not right. To elaborate, I'm running in push config because my fans wouldn't fit in case. The radiator doesnt seem hot either. Temps keep spiking from 79C -> 93C and everywhere inbetween almost every second. whats the issue

I wish they would make an NF-A14x38.

Ridiculously good fans, a like-for-like replacement of some old Arctic fans, dropped the case temps by 10C at half the RPM.

They don't beat Arctic on Price, but damn those things are impressive.

Great Fans had these since Aug 1, 2023 still running strong and quiet lots of air! Have three 140 for intake and one in back for exhaust! Looking to upgrade the fans on my AIO soon.

In a couple months TT will probably have an identical copy of the Noctua A14 G2 fan in black, before Noctua releases a black version.

Controlling your fans can be quite a task.. it is good to show a little resistance and not always go with the flow.

but do they use the stupid 5 pin proprietary cables? because I hated when I HAD to use their hubs

I'm impressed, but I'm still a Noctua industrial 3000 RPM fan though.

These are my favorite fans.

i bought 2 of these two days ago, to replace silent wings 4 140 (1100 rpm version) on my cpu heatsink, was scouring internet for decent review for these found one with detail like yours in this video, keep up with good work man, you realy are the diamond channel for fans and cpu coolers

Did you know the toughest Toughfan isn’t hard to install

Apologize i'm noob. Why you don't use T30 in your comparisons?

The toughfan EX pro is better with a swappable fan blade

What about if U cut the one of the pipe and add extra 360 or 420mm radiator with fans? Thes this ,please

I really like the look, as always case fans is tough to pick because arctic's value

@STSYT I dont care that it doesnt have proper mounts in its current available version but what about testing A14x25R from D15 G2 against everybody else in the usual suite?

ive been using these fans on my arctic freezer ii 280 for the past year. theyre very good :D

I understand the long cable because I was definitely disappointed on my first rig when I had to go buy a bunch of fan cable extensions since they unplugged during cable management

Toughliquid EX Pro review when?

I'll never get the point of hardware fan speed limiter when one can control the speed via software.

Hey STS, would love it if you can do a review on apnx fp2? it has 3.5 MMh2O and 87 CFM. I believe it would be a monster and would dominate your ranking much like the CR360

Love these reviews! Thankyou very much :)

I have three of these in the front if my define 7 xl. They are great. I managed to buy them at about 20 EUR a piece because a German reseller mislabelled them or something. I did however remove the 120mm holders.

Hi, would you recommend that I use this over the p28 as a case fan? I have an asus ap201 case with 6 p28s, and the noise is a bit annoying at 1500rpm+. I would like the quitest fans for case use at medium/high rpm, I know that the Noctua A12X25 has pretty much the best noise /performance ratio, but they're really expensive where I live, so the next best option in terms of price would be appreciated.

Dismantling a GPU will Not void the warranty.... obviously only if you damage it. You deffifnitely NEED to have fans on the card, at least at stock speeds. If you undervolt the gpu than maybe those case fans would be enough but it's Big maybe... The air from the case fans is just To dispersed. You can also undervolt the card with the slapped on fans. But at some point you might as well watercool the card lol. Man, I appreciate the video, but not how you did it. Do some more research and don't mislead people with some of the info.

I got the 7700x just because it was cheaper on prime day. Originally i purchased the 5900x so im sure its an upgrade from that. Plus im already on an amd5 motherboard so no need to change it once I upgrade. I'm happy with my purchase of the 7700x. Maybe next prime day i will get the 78003d.

When taking off the fans on the drp4 , is much easier to Pull the wires off the fan ....not from the heatsink fins

Got my 7600x in March & using it with a ScythMugen5 im at around 40° in normal windoofs mode/videos etc, & games its around 80°, in retrospective, i would have gone for the non-X , if i had known about the temperature 😉

Can you fit E-ATX motherboard in this case?

I agree with everything you said. I got mine years ago and it was a right game getting everything sorted. That said, I keep contemplating upgrading it but I love it too much. It looks stunning and it's quiet as a mouse. Anyone know where I can get a new screw for the glass side panel please?

can someone tell me why the arctic liquid freezer 280 beat the 360 one at 3:50

I'm excited for the black version.

will this cooler be fine on a 7600x ?